Forklift Training Schools Moose Jaw

Forklift Training Schools Moose Jaw - Forklift Training Schools

If you are looking for work as an operator of a forklift, our regulatory-compliant lift truck training Schools provide exceptional instruction in many types and styles of lift trucks, classes on pre-shift inspection, fuel kinds and dealing with fuels, and safe utilization of a forklift. Practical, hands-on training assists participants in acquiring essential operational skills. Program content consists of existing regulations governing the use of lift trucks. Our proven forklift Schools are designed to offer training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

When the lift truck is in operation, do not raise or lower the forks. Loads should not extend higher than the backrest. This is due to the possibility of the load sliding back towards the operator. Inspect for overhead obstacles and make sure there is enough clearance prior to raising a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make certain that no body ever walks beneath the elevated fork. The operator must never leave the lift truck while the load is raised.

The forks must be level when handling pallets, and high enough to extend all the way into and under the load. The fork's width must provide even weight distribution.

Chock the wheels and set the brakes before loading and unloading the truck. The floors should be strong enough to support the combined weight of the load and the forklift. Fixed jacks could be installed to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the forklift height by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Click to Download the pdf